Spring is the most cherished season of the year. Throughout the cold winter, air conditioners are turned off. And it must be ready for hot, sunny days. Since homeowners do not use their air conditioners during the winter, they must be cleaned. If any parts get damaged, it is necessary to seek air conditioner repair in Cambridge, Ontario, to install new parts.
To ensure that they operate at their fullest capability, the following checklist must be used. Follow the list for spring cleaning –
Step 1 – Inspect the Outside Unit
It is considered a good idea to inspect the unit outside the house. It should be clean and free of leaves, dirt, and dust. Before turning on the air conditioner, any damaged parts of the machine should be replaced.
Step 2 – Examine Your Thermostat
Programmable or Wi-Fi thermostats can assist you in scheduling cooling hours. If you have an older or battery-powered thermostat, you can change the batteries to get it up and running again.
Step 3 – Check and Clean Dust from the Condenser
Wind and rain are prone to contaminate condensers. Homeowners can clean the condenser on their own or hire air conditioning services in Milton, Ontario.
Cleaning the bowler’s fan blades using a vacuum and a rag is a do-it-yourself project. After drying, lubricate with some lightweight oil.
Step 4 – Clean or Replace the Filters
Experts recommend changing the filter every quarter of the year, but if the filters are fresh, you can clean them in soapy water to remove dirt and pollutants.
Step 5 – Wipe Down the Coils
Suppose you notice dirt accumulating inside the unit after cleaning the filter. It’s time to do a thorough cleaning. You must contact an air conditioning service in Milton, Ontario, and leave the cleaning to the professionals.
Step 6 – Inspect the Ductwork
Homeowners are responsible for cleaning and sealing all ducts. If it is damaged, it must be fixed as soon as possible. Damaged ductwork will have an impact on the quality of air within the home. It is usually a good idea to get an air conditioner repaired in Cambridge, Ontario.
Step 7 – Investigate the Coolant Pipe Lines
Check the coolant lines for any damage or leaks. Look into it closely; coolant pipelines should be securely insulated.
Step 8 – Get Rid of Obstacles Around the inside AC unit
Homeowners must ensure that no curtains or furnishings are obstructing the airflow.
Step 9 – Check the Circuits
To avoid a fire hazard, look for any faulty circuits.
Step 10 – Inspect Any Sign For a New AC
A well-maintained Acs might also depreciate with time.
Step 11 – Examine the wiring for any signs of damage
Many times, rodents gnaw the wires to avoid being electrocuted.
Step 12 – Hire an expert for routine maintenance
Make an appointment for an air conditioning service in Milton, Ontario, to inspect the inside unit’s health.
Step 13 – Finally, Test the Air Conditioner
Check if the remote and the machine are operational. And breathe in cool air thanks to the freshly cleaned air conditioning.